UnixCompressStream Class

Decompresses the data of the Unix compress command (.Z): LZW codes of 9 to 16 bits, with or without the block mode that clears the table. Invalid data throw an InvalidDataException. This stream cannot compress data.

public sealed class UnixCompressStream : Stream
Inheritance
Stream UnixCompressStream

Constructors

NameDescription
UnixCompressStream(Stream, bool)Initializes a new instance of the UnixCompressStream class to decompress a stream.

UnixCompressStream(Stream, bool)

UnixCompressStream.cs

Initializes a new instance of the UnixCompressStream class to decompress a stream.

public UnixCompressStream(Stream stream, bool leaveOpen = false)

Parameters

stream Stream
The stream to read the compressed data from.
leaveOpen bool
Whether stream stays open when this stream is disposed.

Properties

NameDescription
BaseStreamGets the stream the compressed data are read from.
CanReadWhen overridden in a derived class, gets a value indicating whether the current stream supports reading.
CanSeekWhen overridden in a derived class, gets a value indicating whether the current stream supports seeking.
CanWriteWhen overridden in a derived class, gets a value indicating whether the current stream supports writing.
LengthWhen overridden in a derived class, gets the length in bytes of the stream.
PositionWhen overridden in a derived class, gets or sets the position within the current stream.

Gets the stream the compressed data are read from.

public Stream BaseStream { get; }

Property value

Stream

When overridden in a derived class, gets a value indicating whether the current stream supports reading.

public override bool CanRead { get; }

Property value

bool

When overridden in a derived class, gets a value indicating whether the current stream supports seeking.

public override bool CanSeek { get; }

Property value

bool

When overridden in a derived class, gets a value indicating whether the current stream supports writing.

public override bool CanWrite { get; }

Property value

bool

When overridden in a derived class, gets the length in bytes of the stream.

public override long Length { get; }

Property value

long

Exceptions

NotSupportedException
A class derived from Stream does not support seeking and the length is unknown.
ObjectDisposedException
Methods were called after the stream was closed.

When overridden in a derived class, gets or sets the position within the current stream.

public override long Position { get; set; }

Property value

long

Exceptions

IOException
An I/O error occurs.
NotSupportedException
The stream does not support seeking.
ObjectDisposedException
Methods were called after the stream was closed.

Methods

NameDescription
Flush()When overridden in a derived class, clears all buffers for this stream and causes any buffered data to be written to the underlying device.
Read(byte[], int, int)When overridden in a derived class, reads a sequence of bytes from the current stream and advances the position within the stream by the number of bytes read.
Read(Span<byte>)When overridden in a derived class, reads a sequence of bytes from the current stream and advances the position within the stream by the number of bytes read.
ReadAsync(byte[], int, int, CancellationToken)Asynchronously reads a sequence of bytes from the current stream, advances the position within the stream by the number of bytes read, and monitors cancellation requests.
ReadAsync(Memory<byte>, CancellationToken)Asynchronously reads a sequence of bytes from the current stream, advances the position within the stream by the number of bytes read, and monitors cancellation requests.
ReadByte()Reads a byte from the stream and advances the position within the stream by one byte, or returns -1 if at the end of the stream.
Seek(long, SeekOrigin)When overridden in a derived class, sets the position within the current stream.
SetLength(long)When overridden in a derived class, sets the length of the current stream.
Write(byte[], int, int)Throws a NotSupportedException: this stream cannot compress data.
Write(ReadOnlySpan<byte>)Throws a NotSupportedException: this stream cannot compress data.

When overridden in a derived class, clears all buffers for this stream and causes any buffered data to be written to the underlying device.

public override void Flush()

Exceptions

IOException
An I/O error occurs.

Read overloads

Read(byte[], int, int)

UnixCompressStream.cs

When overridden in a derived class, reads a sequence of bytes from the current stream and advances the position within the stream by the number of bytes read.

public override int Read(byte[] buffer, int offset, int count)
Parameters
buffer byte[]
An array of bytes. When this method returns, the buffer contains the specified byte array with the values between offset and (offset + count - 1) replaced by the bytes read from the current source.
offset int
The zero-based byte offset in buffer at which to begin storing the data read from the current stream.
count int
The maximum number of bytes to be read from the current stream.
Returns

int The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if count is 0 or the end of the stream has been reached.

Exceptions
ArgumentException
The sum of offset and count is larger than the buffer length.
ArgumentNullException
buffer is null.
ArgumentOutOfRangeException
offset or count is negative.
IOException
An I/O error occurs.
NotSupportedException
The stream does not support reading.
ObjectDisposedException
Methods were called after the stream was closed.

Read(Span<byte>)

UnixCompressStream.cs

When overridden in a derived class, reads a sequence of bytes from the current stream and advances the position within the stream by the number of bytes read.

public override int Read(Span<byte> buffer)
Parameters
buffer Span<byte>
A region of memory. When this method returns, the contents of this region are replaced by the bytes read from the current source.
Returns

int The total number of bytes read into the buffer. This can be less than the size of the buffer if that many bytes are not currently available, or zero (0) if the buffer's length is zero or the end of the stream has been reached.

ReadAsync overloads

ReadAsync(byte[], int, int, CancellationToken)

UnixCompressStream.cs

Asynchronously reads a sequence of bytes from the current stream, advances the position within the stream by the number of bytes read, and monitors cancellation requests.

public override Task<int> ReadAsync(byte[] buffer, int offset, int count, CancellationToken cancellationToken)
Parameters
buffer byte[]
The buffer to write the data into.
offset int
The byte offset in buffer at which to begin writing data from the stream.
count int
The maximum number of bytes to read.
cancellationToken CancellationToken
The token to monitor for cancellation requests. The default value is CancellationToken.None.
Returns

Task<int> A task that represents the asynchronous read operation. The value of the TResult parameter contains the total number of bytes read into the buffer. The result value can be less than the number of bytes requested if the number of bytes currently available is less than the requested number, or it can be 0 (zero) if count is 0 or if the end of the stream has been reached.

Exceptions
ArgumentNullException
buffer is null.
ArgumentOutOfRangeException
offset or count is negative.
ArgumentException
The sum of offset and count is larger than the buffer length.
NotSupportedException
The stream does not support reading.
ObjectDisposedException
The stream has been disposed.
InvalidOperationException
The stream is currently in use by a previous read operation.
OperationCanceledException
The cancellation token was canceled. This exception is stored into the returned task.

ReadAsync(Memory<byte>, CancellationToken)

UnixCompressStream.cs

Asynchronously reads a sequence of bytes from the current stream, advances the position within the stream by the number of bytes read, and monitors cancellation requests.

public override ValueTask<int> ReadAsync(Memory<byte> buffer, CancellationToken cancellationToken = default)
Parameters
buffer Memory<byte>
The region of memory to write the data into.
cancellationToken CancellationToken
The token to monitor for cancellation requests. The default value is CancellationToken.None.
Returns

ValueTask<int> A task that represents the asynchronous read operation. The value of its ValueTask<TResult>.Result property contains the total number of bytes read into the buffer. The result value can be less than the length of the buffer if that many bytes are not currently available, or it can be 0 (zero) if the length of the buffer is 0 or if the end of the stream has been reached.

Exceptions
OperationCanceledException
The cancellation token was canceled. This exception is stored into the returned task.

Reads a byte from the stream and advances the position within the stream by one byte, or returns -1 if at the end of the stream.

public override int ReadByte()

Returns

int The unsigned byte cast to an Int32, or -1 if at the end of the stream.

Exceptions

NotSupportedException
The stream does not support reading.
ObjectDisposedException
Methods were called after the stream was closed.

Seek(long, SeekOrigin)

UnixCompressStream.cs

When overridden in a derived class, sets the position within the current stream.

public override long Seek(long offset, SeekOrigin origin)

Parameters

offset long
A byte offset relative to the origin parameter.
origin SeekOrigin
A value of type SeekOrigin indicating the reference point used to obtain the new position.

Returns

long The new position within the current stream.

Exceptions

IOException
An I/O error occurs.
NotSupportedException
The stream does not support seeking, such as if the stream is constructed from a pipe or console output.
ObjectDisposedException
Methods were called after the stream was closed.

SetLength(long)

UnixCompressStream.cs

When overridden in a derived class, sets the length of the current stream.

public override void SetLength(long value)

Parameters

value long
The desired length of the current stream in bytes.

Exceptions

IOException
An I/O error occurs.
NotSupportedException
The stream does not support both writing and seeking, such as if the stream is constructed from a pipe or console output.
ObjectDisposedException
Methods were called after the stream was closed.

Write overloads

Write(byte[], int, int)

UnixCompressStream.cs

Throws a NotSupportedException: this stream cannot compress data.

public override void Write(byte[] buffer, int offset, int count)
Parameters
buffer byte[]
The data.
offset int
The offset of the data in buffer.
count int
The number of bytes.

Write(ReadOnlySpan<byte>)

UnixCompressStream.cs

Throws a NotSupportedException: this stream cannot compress data.

public override void Write(ReadOnlySpan<byte> buffer)
Parameters
buffer ReadOnlySpan<byte>
The data.